ULTRASONIC ALKALINE CLEANER Supplier Distributor Manufacturer in Kolkata West Bengal india

ULTRASONIC ALKALINE CLEANER is an outstanding water-based alkaline product, which is specially developed for ultrasonic cleaning applications. It effectively removes grease, fuel oil, lub oil, sludge, carbon deposits, dirt, and grime. ULTRASONIC ALKALINE CLEANER is water-based, non-flammable, biodegradable and free from hydrocarbon solvents.

Application

ULTRASONIC ALKALINE CLEANER is mainly used in ultrasonic baths. It is effective in contact and non-contact cleaning equipment for ultrasonic, immersion and mechanical scrub applications.

Use and dosing

Instructions are based on experience and are meant only as a guide since circumstances for each cleaning operation vary. They are not intended to interfere with the judgment of the vessel’s responsible personnel. ULTRASONIC ALKALINE CLEANER should be used in a 5 – 25% solution in water at a temperature of 50 – 70o C. Dismantle the equipment to be cleaned, put the components in the bath taking care that the elements are completely immersed and kept separate. We recommend a cleaning time of 5-30 minutes but longer if necessary.

WATER-BASED DETERGENT FOR ULTRASONIC TREATMENTS

Excellent water-based degreaser.
Specially developed for ultrasonic cleaning applications.
Quick and effective.
Non-caustic & non-flammable.
Non-toxic,bio- degradable, minimizing environmental concerns.
Free of hydrocarbon contents.
Cost effective, easy to apply and use.

What liquid is used in ultrasonic cleaner?

Ultrasonic cleaning is a process that uses ultrasound (usually from 20–40 kHz) to agitate a fluid. The ultrasound can be used with just water, but use of a solvent appropriate for the item to be cleaned and the type of soiling present enhances the effect.

What do ultrasonic cleaners do?

Ultrasonic cleaning uses cavitation bubbles induced by high frequency pressure (sound) waves to agitate a liquid. The agitation produces high forces on contaminants adhering to substrates like metals, plastics, glass, rubber, and ceramics. This action also penetrates blind holes, cracks, and recesses.

Does ultrasonic clean rust?

Remove any loose rust with a cloth if the parts are delicate or a wire brush for stronger parts. This will increase the effectiveness of the ultrasonic cleaner. ... You will see bubbles forming around the parts as the ultrasonic waves cause minute jets of water to break against the surface and release the rust.