Primary tabs
![](http://eastindiachemicals.com/sites/default/files/styles/large/public/default_images/private-label-foam_0.jpg?itok=IGr8LjHo)
Super Plasticizer FlowMaster Concrete
SKU::RXSOL-67-6704-020
Coating formulations with RXSOL-67-6704-020 containing polymers prevent calcium ions from being formed as LIME on concrete surface and improve the appearance and durability of coating.
When mixed with concrete, Super Plasticizer FlowMaster Concrete produces high workability concrete that practically levels itself and requires little vibration during placement and handling. Moreover, it can be applied to regular workability concrete to significantly reduce water content in order to increase early and subsequent strengths. Due to its colorlessness, the material is suitable for tile and light-colored concrete mixes.
Construction applications: SUPERPLASTICIZERS are used to reduce water in CONCRETE formulations. specially formulated organic plasticizer improves the workability of concrete, reducing water requirement and making the concrete stronger. It retards the setting of concrete so that transportation of RMC is not a problem. Benefits of these additives include improved strength, improved workability, improved durability of cement mixtures. This polymer mixture in cement mixtures control air pore content and prevent AGGLOMERATION of powders during the spray-drying process from the powder manufacturing and storage. Coating formulations with RXSOL-67-6704-210 containing polymers prevent calcium ions from being formed as LIME on concrete surface and improve the appearance and durability of coating.
With new generation polymners based admixture for use as a Superplasticizing admixture or high ranger Water Reducerad mixture for all types of concrete. Suitable for ready mix concrete plants, it is capable of high workability retention up to 2-3 hrs with set retarding effect that helps to produce flowing concrete in hot climates. Further, it assists in long distance transportation of concrete at tropical atmosphere.
This has been formulated to reduce water requirement and to provide excellent plasticity and higher slump for both horizontal and vertical applications. RXSOL-67-6704-210 is manufactured under stringent quality control to ensure uniform and superior performance.
RXSOL-67-6704-210 imparts strong dispersion in the concrete reducing the total water demand in the mix. The reduction in water content also helps to achieve high ultimate strength. This is also very much useful for concrete with free pouring and pumpable consistency. Cement content of the concrete can also be economized with RXSOL-67-6704-210 due to its high cement dispersion property.
Super Plasticizer FlowMaster Concrete is utilized to provide high workability to cement or aggregate mix without adding extra water. It assists in improving retention of high workability without excessive retardation of set. It is suitable to use in high temperature & can be easily transported for long distances.
Super Plasticizer FlowMaster Concrete can be used in all type of ready-mix and precast concrete where durable concrete with low water-cement ratio, high strength and low permeability is specified and in applications where high slump flowable concrete is required.
- Specially formulated for RMC.
- Delays cement hydration process and retains slump, thereby helping in transportation of concrete.
- In all concrete work such as basement walls, underground and overhead tanks.
- In all RCC walls, pillars etc.
- Reduces water/cement ratio while maintaining same slump.
- Highly cost effective
- Improves strength of concrete and reduces shrinkage cracks.
Super Plasticizer FlowMaster Concrete dosage should be determined according to the job specific requirements. Dosage rate will vary depending on the temperature, type of cement, percentage of supplementary cementitious material, fineness of sand and water content. RXSOL recommends that trial mixes are performed in order to establish the required dosage and a regular process control tests should be conducted in order to adjust the admixture dosage.
Note: Below dosage rate is given as per previous trials. Kindly conduct lab trials or site trials for accurate dosage.
In general practice Normally dispensed at a rate of 1.0-1.5 Liters per 100kg of cement. The dosage can further be enhanced to 3.5% depending on climatic situations. In general practice RXSOL-67-6704-020 added to the concrete with gauging water. ( It helps in reduction of water – cement ratio for the same slump. The required quantity of RXSOL-67-6704-020 is added to the concrete mix along with the water. )
The optimal dosage is determined by site trials.
It may also be added separately to freshly mixed concrete
It should be preferably added directly to water prior mixing to the wet aggregate
However, actual site trials should be conducted for finding exact dosages.
Super Plasticizer FlowMaster Concrete should not be mixed dry cement or dry aggregates.
(An indicative example: With control slump of 50 mm collapsible slum can be achieved for 15-30 min, 1 hr/170mm, 2 hr/150 mm &3hr120 mm depending on temperature & humidity condition with admixture dosage of 1.0-1.5% of the wt. of cement). Dosage may be increased or decreased depending upon slump required, humidity conditions, temperature & mix design. The above example is just for indication
Note: Example not rephrased.
NOTE :::--- RXSOL-67-6704-020 can be added to the concrete mix near the end of mixing cycle in the concrete mixer and it can be also added on job-site by mixing at a higher speed and more revolutions in the truck.
Why to use Super Plasticizer FlowMaster Concrete from RXSOL?
- It provides good cohesive pump able mix at low W/C ratio & moderate cement contents
- Imparts extreme fluidity to the concrete, which facilitates rapid placement of concrete
- Helps in controlled & predictable retardation of setting with improved slump retention
- Useful in production of self compacting concrete
- Provides high and extended slump suitable for Better slump retention.
- Improves workability and plasticity
- Compatible with all types of cement.
- Reduces water requirement,increases strength and produce durable and dense concrete
- Improves pumping and finishing characteristics
- Reduces segregation
- Applied in complicated formwork or with congested reinforcement
- Achieves good compaction without any excessive vibration
- Reduced permeability, segregation and bleeding
- Helps in increasing compressive and flexural strength
- It is chloride – free
- Helps to achieve pumping concrete.
- Increases ultimate strength with maximum water reduction.
- Controls set retardation with optimum dosage.
-
Economizes the mix reducing cement content.
Physical Properties:
Appearance | Colourless to pale liquid |
Volumetric mass @ 250 C | 1.08 ± 0.02 kg/litre |
Chloride Ion content | As per BS EN : 480-10-1997* (Product contains a chemical which interferes in the procedure as per IS 9103 |
Workability Retention | 2 hours and more Depending on Dosage |
Storage
Super Plasticizer FlowMaster Concrete should be stored in dry and ventilated area at temperature above 0° C. If material is frozen please contact us. Shelf life is 1 year when stored in dry conditions between 10° C to 25° C in original unopened packages.
Plasticizers are organic or mixture of organic & inorganic substances. Plasticizer used to increase the workability of concrete with constant w/c ratio. it also allow the reduction of water for formation of concrete having same workability.
#SuperPlasticizer_AjmanAbudhabiDubaiSharjahFujairah
#SuperPlasticizer_MuscatOman
#SUPERPLASTICIZERmanufacturer
#CEMENTWORKABILITYENHANCER
Super Plasticizer FlowMaster Concrete manufacturer and supplier in Fujairah, Sharjah, Ajman, Abudhabi, Dubai, Oman Muscat, Barka, Mumbai, Kandla Gandhidham, Kolkata, Chennai, Visakhapatnam, Canada, Sudan, Nairobi Kenya
RXSOL-67-6704-210 is for industrial use only and should be kept out of reach of children. This is non-toxic, non-flammable and non hazardous. However, any splash on the human body should be washed out immediately with plenty of water.
STORAGE | : | Stable under normal conditions. Should be stored away from direct sunlight. |
HANDLING | : | Use of gloves and safety glasses is recommended. |
PACKING | : |
Available in 25 Ltr. 210 Ltr drums and 1000 Ltrs IBC Tanks |