Primary tabs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

Activated Alumina Ball 5 to 8

0
No votes yet
SKU::RXSOL-24-1905-108

Product Qty Per Unit: 
25.00
Product usage unit: 
Kg Granules

Negotiate Price

Product Delivery Locations: 
Haldia Port, Kolkata Port Trust, Dhamra Port, Paradip Port
Generic Name: 
2 -5 mm Highly Porous Aluminium Oxide

More effective then ORDINARY alumina. Also refer new tec grade if ur requirement to absorb poisonous gases RXSOL-24-1905-025

Product Description: 

Activated alumina 2 - 5 mm is highly porous material; this material can have a surface area significantly over 200 square metres/g. Very suitable for use as a filter of fluoride, arsenic and selenium in drinking water.

Product Application: 

Activated Alumina Desiccants:

Activated Alumina Desiccants is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated Alumina Desiccants  will not soften or disintegrate easily when immersed in water.

Dew points to -40°F and lower may be achieved with Activated Alumina Desiccants  depending on dryer design and operating conditions.

The 1/8” (2-5mm) bead is the size most frequently used in regenerative dryers.

If size is not known or specified, the 1/8” (2-5mm) size is usually satisfactory. However, if Activated Alumina Desiccants is used in a regenerative dryer and the desiccant retaining screens cannot be measured, the 1/4” (5-10mm) size should be used as a bed support (6” layer). If at all possible, obtain a sample and measure it  before ordering.

Product Benefits:

  1. High adsorption capacity. With high surface area and excellent pore distribution, Activated Alumina Desiccants  has a high water adsorption capacity. This reduces initial cost, energy consumption and operating costs through smaller bed sizes and/or longer operating cycles.
  2. Low abrasion. Insures less dusting during tower depressurization or loading. Low abrasion means low pressure drop and a reduced chance of plugging the afterfilter.
  3. Resists liquid water. Water slugging due to upstream failure of aftercooler, separators or drain traps will not fracture the alumina beads. The adsorption capacity of the desiccant can be restored after complete regeneration.
  4. High crush strength. High crush strength, which limits dusting, is important during loading of desiccant towers. High crush strength makes alumina effective as a prebed material when used with other types of desiccants.
  5. Uniform bead sizes. Activated Alumina Desiccants is a uniformly sized bead. It provides low pressure drop to minimize channeling and ensures utilization of the full bed column section.
Product Procedure: 

Drier Chemicals manufacturer, importer and exporter of industrial chemicals and desiccants such as silica gel, activated alumina, activated carbon and carbon molecular sieves etc. Click on this link to get Most powerful GAS  absorber.

Product Note: 

Also refer more details of Impregnated Activated Alumina with potassium permagnate KMNO4.

Potassium Permanganate Impregnated Alumina has strong oxidizing property with Potassium Permanganate (KMnO4), it has good efficienty in removing Hydrogen Sulfide(H2S) , Chlorine(Cl2), Formaldehyde(HCHO), Nitric Oxide (NO) & Sulfur Dioxide(SO2) from air. 

Product Technical Specification: 

Physical Properties: ACTIVATED ALUMINA BALL Size 5-8 mm Al2O3 94.6%

  5-8 mm
Color and form  White  bead
 Bulk density  48 lbs/Ft3
 Crush strength  17-30 lbs or 82N/grain
 Surface area  1.74 x 106 sq ft/lb or 210.36m2/g
Static adsorption
 Humidity
 
Moisture Absorption 33%           -
100% RH
90% RH
60% RH
10% RH
42.0%
37.5%
21.0%
7.5%

SiO2 0.046%
Fe2O3 0.013%
Na2O 0.317%
L.O.I 3.88%
Porosity Volume 0.4ml/g
 

Technical Parameter:

GRADE (Instrument - Air Drying Grade)
From Beads
Size (mm or mic) 5-8 / 3-5
Bulk density (gm/lit) 0.75-0.85
Surface area (m2 / gm) 345-415
Pore Volume (cc/gm) 0.40-0.50
Adsorption Capacity (60 % RH) 21.5
Attrition Loss (%) 0.2
Chemical Composition (%)  
Na2O NA
Fe2O NA
SiO2 NA
TiO2 NA
Promoter NA
LOI (300C-1000C) 6-8
Al2O3 (By difference) 92 min
Product pack size: 
25 Kgs.
Product alias: 
<p> 5 - 8 mm Alumina Ball</p>

International quality product of activated alumina customized as per your specifications. Our skilled quality control supervisors monitor the entire manufacturing process to ensure production of International Quality chemicals.

Activated Alumina supplier and exporter in Mumbai, Kandla - Gandhidham, Surat, Chennai, Ennore, Visakhapatnam, Kolkata, Turbhe Pawana Mahape MIDC Navi Mumbai and also we are major supplier of Activated alumina in Sharjah, Abu Dhabi, Dubai, Ajman, Fujairah, Muscat - Oman.

Activated Alumina is an aluminium oxide that is highly porous and exhibits tremendous surface area. Activated Alumina is resistant to thermal stock and abrasion and will not shrink, swell, soften nor disintegrate when immersed in water.
 
Surface area is in the range 345-415. Because it has a higher capacity for water than Silica Gel at elevated temperatures it is mainly used as a desiccant for warm gases including air. In many commercial applications zeolitic materials have now replaced it.
 
Application:
Purification of gases and liquids (removal of metallic traces, TBC and HF compounds).
Drying of organic liquids such as LPG, propylene, butene, steam cracked liquids, cyclohexane, gasoline, chloro- and fluorohydrocarbons, aromatic solvents.
Drying of air and gases such as steam cracked gases, catalytic reforming recycle gas, synthesis gas, natural gas, CO2.
Drying of organic liquids as LPG, aromatics, steam cracked liquids, gasoline, chloro- and fluorocarbons.
Drying of air and gases as steam cracked gases, catalytic reforming recycle gases, synthesis gases, methyl chloride, natural gas, LNG, etc.
Drying of hydrogen, oxygen, nitrogen, CO2, etc.
Purification of gases and liquids (removal of metallic traces, BF3, TBC, HCl, HF and fluorinated hydrocarbons).
Catalyst for Claus conversion in sub dew point processes.
Air drying (PSA, TSA)
Instrument air, supersonic wind tunnel, compressed air
Gas drying Air separation plants, inert and rare gases, Hydrogen, oxygen, nitrogen, CO2.
Natural gas in production and compression plants, LPG, LNG.
Aromatics, naphtha cuts and cracked gas.
Articles: 
Remarks: 

High quality activated alumina for applications such as catalysts adsorption in polyethylene and hydrogen peroxide production, selective adsorption of chemicals from gas streams, and removal of fluoride from drinking water. We also provide activated alumina that can be used as a desiccant in many other applications, including compressed air drying.

Product Articles