Primary tabs
OxyShield Plus Boiler Oxygen Scavenger
SKU::RXSOL-42-5029-200
Scavenges oxygen and passivates iron and copper surfaces, rendering them more resistant to corrosion
OxyShield Boiler Oxygen Scavenger is a high performance corrosion inhibitor for Boilers Condensate systems scientifically formulated for use in steam boilers, condensate systems and high pressure hot water systems. OxyShield Boiler Oxygen Scavenger is a steam volatile liquid treatment based on complex Hydroxylamine compounds used to remove oxygen chemically from feed water, boiler water and condensate in steam generating systems and the recirculating water in high pressure hot water systems. Additionally, OxyShield Boiler Oxygen Scavenger passivates iron and copper surfaces, rendering them more resistant to corrosion.
OxyShield Boiler Oxygen Scavenger use in Steam Boilers
OxyShield Boiler Oxygen Scavenger should be fed continuously to the deaerator storage section, the condensate or directly to the boiler. Choice of feed point is dependent upon the specific problem to be corrected. The recommended concentration to be maintained in the feedwater will vary with operating pressure and the particular installation and will be advised by Accepta technical support. The normal dosage rate for OxyShield Boiler Oxygen Scavenger is 20ml/m3 of feed water per mg/L of dissolved oxygen and the dosage should be adjusted to give a residual of 0.1 -0.25ppm of DEHA in the feed or boiler water.
OxyShield Boiler Oxygen Scavenger use in High Pressure Hot Water Systems
OxyShield Boiler Oxygen Scavenger should be dosed at an initial rate of 200ml/m3 and thereafter to maintain a DEHA residual of 5-10ppm.
OxyShield Boiler Oxygen Scavenger use in Steam Boilers
The normal dosage rate for OxyShield Boiler Oxygen Scavenger is 20ml/m3 of feed water per mg/L of dissolved oxygen and the dosage should be adjusted to give a residual of 0.1 -0.25ppm of DEHA in the feed or boiler water.
OxyShield Boiler Oxygen Scavenger use in High Pressure Hot Water Systems
OxyShield Boiler Oxygen Scavenger should be dosed at an initial rate of 200ml/m3 and thereafter to maintain a DEHA residual of 5-10ppm.
Features and Benefits of OxyShield Oxygen Scavenger for Boiler
- High performance corrosion inhibitor
- Passivation of metal surfaces through the formation of magnetite and cuprous oxide films
- Minimisation of iron and copper deposits in the boiler by reducing these metals to their more soluble ferrous and cuprous forms
- Ability to provide corrosion protection to the after-boiler sections of the system
| Appearance | Clear Liquid |
| Odor | Amine like |
| pH | 10-11 |
Oxygen Scavenger for Boiler Water exporter and supplier in India UAE Middle East Oman Kenya Africa. Oxygen Scavenger for Boiler Water supplier in Mumbai, Kandla Surat Gujrat, Kolkata, West Bengal, Chennai Tamilnadu, Visakhapatnam, Andhra Pradesh, Dubai, Fujairah, Abudhabi, Sharjah, Ajman, Muscat Barka Sohar, Nairobi Kenya Sudan, Yemen Tanzania Africa
#OxygenScavengerforBoiler
#OxygenScavengermanufacturer
#OxygenScavengersupplier
#AminebasedOxygenScavenger
