Primary tabs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

Anionic Polyacrylamide Flocculant

0
No votes yet
SKU::RXSOL-40-4160-050

Product Qty Per Unit: 
25.00
Product usage unit: 
Kg.PWD

Negotiate Price

Product Delivery Locations: 
Haldia Port, Kolkata Port Trust, Dhamra Port, Paradip Port
Generic Name: 
Flocculating Agent Anionic Polyacrylamide

Polyacrylamide Flocculant to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.

Product Description: 

Anionic Polyacrylamide Flocculant

Anionic Polyacrylamide Flocculant is an medium anionic charged polyelectrolyte to be used as flocculant in direct filtration process for settling of inorganic suspended solids, effluent water.

Product Application: 

It is used for effluent treatment of inorganic suspended solids found in chemical, Fishery, food, textile, dye, other effluent water, mining and coal washing waste water, metal processing, etc.

Product Procedure: 

The dosage range of Anionic Polyacrylamide Flocculant  Anionic Polyelectrolyte Powder varies from 0.2 - 3.0 ppm depending upon the type of effluent and application. It is always advised to do a jar test for evaluating the functioning and approximate dosage of Anionic Polyacrylamide Flocculant  Anionic Polyelectrolyte Powder.

Jar Test: Put sample of effluent in a beaker and add Anionic Polyacrylamide Flocculant Powder as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the floc properly at this time and note the sedimentation and clarity of top solution.

Procedure and precautions upon dispersion and dissolving flocculants:-

Dissolving time: The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

Agitation speed: The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

Dissolving concentration: Flocculants should be standardly be dissolved to 0.1-0.2% concentration. It is also effective to start dissolving at a slightly higher concentration, and then dilute the flocculant mixture immediately before use.

Product Note: 

Handling measures and precautions : 

Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.

Storage: 
 
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight.

Product Technical Specification: 

Properties : 

Form :Powder
Colour :Off-white
Odour :Odourless
Flash point :Not applicable
Flammability :Not flammable
Bulk density :Approx. 750 kg/m3
Self ignition :Not self-igniting
Explosion hazard :Not explosive
Fire promoting properties :Not fire-propagating
Solubility in water :Forms a viscous solution.
 
Product pack size: 
25 Kgs
Product alias: 
<p> Magnafloc 5250, Anionic Flocculating Agent, Polyelectrolyte Jelly Powder Form</p>

Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Mumbai, Kandla, Mundra, Kolkata, Howrah, Vishakhapatnam, Chennai, India.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Fujairah, Dubai, Abu Dhabi, Sharjah, Ajman, UAE Middle East.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Muscat Barka Oman.
Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Nairobi Mombasa Kenya Africa, Canada.

#AnionicPolyacrylamideFlocculant
#Flocculant
#Polyacrylamide
#FlocculatingAgent


Anionic Polyacrylamide Flocculant Powder manufacturer supplier exporter in Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Gulf, Yemen,UAE Middle East, Ruwi, Ghala, Muscat Barka Oman, Nairobi Kenya Africa, Mumbai, Kandla, Kolkata, Vishakhapatnam, Chennai, India, Canada, Nairobi Kenya, Sudan


Articles: 
Remarks: